مطلوب مهندسين بترول

5 - 12 Years Naukri Gulf

Fire & Gas Supervisor RLP

On-site - قطر - الدوحة ٣٠ يوليو ٢٠٢٦

البحث والتطوير

Supervise preventive, corrective, predictive, and breakdown maintenance activities for Fire & Gas (F&G) systems. Ensure the safe, reliable, and continuous operation of Fire & Gas protection systems across the plant. Lead maintenance teams during routine operations, shutdowns, and turnaround activities. Perform troubleshooting, fault diagnosis, and root cause analysis of Fire & Gas system failures. Plan, schedule, and monitor maintenance activities in accordance with maintenance procedures and HSE requirements. Coordinate with Operations, Maintenance, Engineering, and OEM vendors to resolve technical issues. Review work orders, maintenance records, and equipment history using SAP PM (preferred). Ensure compliance with Permit to Work (PTW), Lock Out/Tag Out (LOTO), Job Safety Analysis (JSA), and company HSE procedures. Monitor spare parts inventory and recommend improvements to enhance system reliability. Prepare technical reports and maintenance documentation.Desired Candidate Profile<h2>Technical Requirements</h2>Candidates must have hands-on maintenance experience with:<ul><li>Fire Alarm Systems</li><li>Gas Detection Systems</li><li>Flame, Smoke & Heat Detection Systems</li><li>Public Address & General Alarm (PAGA) Systems</li><li>FM200 Fire Suppression Systems</li><li>VESDA / HSSD Systems</li><li>Fire & Gas Control Panels</li><li>PLC/SCADA interfaces related to Fire & Gas systems</li></ul>Honeywell Emerson NOTIFIER Dräger Zellweger Allen-Bradley PLC<h2>Qualifications & Experience</h2><ul><li>Bachelor's Degree in Electrical, Electronics, Instrumentation Engineering, or a related discipline.</li><li>Minimum 5-7 years of hands-on Fire & Gas Systems Maintenance experience in Oil & Gas, Petrochemical, Refinery, LNG, or Chemical process plants.</li><li>Proven supervisory experience leading Fire & Gas maintenance teams.</li><li>Strong knowledge of NFPA standards, ATEX requirements, PTW systems, and Root Cause Analysis (RCA).</li><li>Experience with SAP PM is preferred.</li></ul>Only candidates with proven hands-on Fire & Gas Systems Maintenance experience in operating Oil & Gas, Petrochemical, Refinery, LNG, or Chemical processing plants will be considered. Candidates whose experience is primarily in Telecom, ELV, CCTV, Security Systems, or Fire & Gas design, installation, or commissioning without substantial maintenance experience are not suitable for this role.We are looking for a technically competent and safety-focused Fire & Gas Supervisor with proven hands-on maintenance experience in Fire & Gas systems within the Oil & Gas, Petrochemical, Refinery, LNG, or Chemical processing industry. Candidates should have: Bachelor's Degree in Electrical, Electronics, or Instrumentation Engineering.Minimum 5-7 years of hands-on Fire & Gas Systems Maintenance experience. Supervisory experience leading maintenance teams in operating process plants.Hands-on experience with Fire Alarm, Gas Detection, Flame, Smoke & Heat Detection, PAGA, FM200, and VESDA/HSSD systems. Experience in preventive, corrective, and breakdown maintenance.Strong troubleshooting and Root Cause Analysis (RCA) skills. Experience supporting plant shutdowns and turnarounds.Knowledge of Honeywell, Emerson, NOTIFIER, Dräger, Zellweger, Allen-Bradley PLC, SAP PM, PTW, LOTO, NFPA, and ATEX standards. Good communication, leadership, and teamwork skills.

دوام كامل 6 - 12 Years Naukri Gulf

High Voltage Technician

On-site - قطر - Ras Laffan ٢٠ يوليو ٢٠٢٦

الهندسة

Job Summary The High Voltage (HV) Technician is responsible for the installation, operation, inspection, preventive maintenance, troubleshooting, and repair of high-voltage electrical systems and equipment. The role ensures the safe and reliable operation of transformers, switchgear, substations, generators, and associated electrical distribution systems while complying with company procedures, electrical standards, and HSE regulations. Duties & Responsibilities :<ul><li>Operate, inspect, and maintain high-voltage electrical systems (11kV, 33kV, or higher as applicable).</li><li>Perform preventive, predictive, and corrective maintenance on HV switchgear, transformers, circuit breakers, motors, cables, and substations.</li><li>Troubleshoot electrical faults using electrical drawings, test equipment, and diagnostic tools.</li><li>Carry out isolation, Lock Out Tag Out (LOTO), and permit-to-work procedures before maintenance activities.</li><li>Conduct insulation resistance, continuity, earth resistance, and functional testing using approved testing instruments.</li><li>Inspect HV panels, busbars, relays, protection systems, and electrical connections for defects.</li><li>Monitor transformer oil levels, temperatures, cooling systems, and protection devices.</li><li>Perform switching operations in accordance with approved procedures and authorization levels.</li><li>Maintain accurate maintenance records, inspection reports, and equipment history.</li><li>Assist during commissioning, shutdowns, and major maintenance activities.</li></ul>Desired Candidate Profile<ul><li>Diploma or ITI in Electrical Engineering or Electrical Technology.</li><li>High Voltage Authorization/Competency Certificate (preferred).</li><li>Minimum 5 years of experience in high-voltage electrical maintenance.</li><li>Experience in industrial plants, oil & gas, facilities management, utilities, power generation, or large commercial facilities.</li><li>Hands-on experience with transformers, HV switchgear, substations, and protection systems.</li></ul>

8 - 10 Years Naukri Gulf

Treasury Analyst

On-site - قطر - الدوحة ٢١ مايو ٢٠٢٦

المحاسبة والمالية والبنوك

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Department CORPORATE FINANCE & CONTROLS Primary Purpose of the Job Act as a Front Office Treasurer, responsible for communication with both External counterparties such as Banks, and QatarEnergy Subsidiaries and Affiliate companies, as well as Internal Counterparties within QatarEnergy's departments and Divisions. Required Experience and Skills At least 8-10 years of experience in trading houses adequate exposure to LNG trading knowledge and trade and corporate financing. Previous experience in similar capacity in an oil and gas (LNG) industry or banking institutions would be an added advantage. Knowledge of systems in a computerized business environment which includes knowledge and experience in MS Office, Treasury middleware, Bloomberg, SAP Treasury Risk Module (TRM) or similar advanced ERP systems. Excellent people management skills, leadership, and coaching skills.</div></section><section>Desired Candidate ProfileRequired Experience and Skills <ul> <li>At least 8-10 years of experience in trading houses adequate exposure to LNG trading knowledge and trade and corporate financing. Previous experience in similar capacity in an oil and gas (LNG) industry or banking institutions would be an added advantage.</li> <li>Knowledge of systems in a computerized business environment which includes knowledge and experience in MS Office, Treasury middleware, Bloomberg, SAP Treasury Risk Module (TRM) or similar advanced ERP systems.</li> <li>Excellent people management skills, leadership, and coaching skills.</li> </ul> Educational Qualifications <ul> <li>Bachelor's in Finance/ Accounting/ Commerce/ Business.</li> </ul></section>

من ٠ إلى ٠ سنة بيت.كوم

Engineering Lead

On-site - قطر ٢٦ مايو ٢٠٢٦

الهندسة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Hiring: Engineering Lead – Rotating Equipment Location: Qatar (Offshore/Project Site) Industry: Oil & Gas / LNG Employment Type: Contract / Long-Term Project ? Work Setup: 100% Onshore ? Rotation: 12 Weeks ON / 2 Weeks OFF ? Schedule: 6 Days/Week | 8–10 Hours/Day   Job Purpose We are seeking an experienced Engineering Lead – Rotating Equipment to provide technical leadership and governance across major LNG compression projects. The role focuses on Gas Turbines (GTG) and Centrifugal Compressors (GTC), ensuring design integrity, compliance, and lifecycle performance of all rotating machinery. Key Responsibilities<ul><li>Lead all Rotating Equipment engineering activities across EPC projects and operations</li><li>Ensure compliance with project specifications, standards, and companys requirements</li><li>Manage and coordinate:<ul><li>Design deliverables (datasheets, specifications, technical packages)</li><li>Equipment integration and optimization</li></ul></li><li>Interface with:<ul><li>EPC Contractors</li><li>OEMs and Vendors</li><li>Internal stakeholders and shareholders</li></ul></li><li>Oversee procurement phase to ensure timely placement of long-lead equipment</li><li>Validate contractor engineering capability, resources, and technical performance</li><li>Drive risk-based evaluation and resolution of complex technical issues</li><li>Ensure alignment with QGPMS and company standards</li><li>Capture and implement Lessons Learned for continuous improvement</li><li>Support policy development and update engineering procedures</li></ul>Qualifications & Experience<ul><li>Bachelor’s Degree in Mechanical Engineering</li><li>Minimum 8+ years of experience in rotating equipment engineering</li><li>Minimum 5+ years offshore Oil & Gas machinery experience</li><li>Minimum 2+ years in supervisory or lead role</li><li>Strong expertise in:<ul><li>Gas Turbines (GTG)</li><li>Centrifugal Compressors (GTC)</li><li>Control Systems & Performance Testing</li></ul></li><li>Experience with:<ul><li>Compression packages</li><li>Major projects (>$100M)</li><li>EPC environments and vendor/OEM interaction</li></ul></li><li>Prior experience with Operating Companies preferred</li></ul>Key Skills<ul><li>Strong technical leadership and decision-making</li><li>Project planning, coordination & execution</li><li>Stakeholder engagement and interface management</li><li>Risk assessment and problem-solving</li><li>Excellent communication and influencing skills</li><li>Ability to work in multicultural, high-pressure environments</li></ul> With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

بيت.كوم

Head of Project Control

On-site - قطر ٣٠ يوليو ٢٠٢٦

الهندسة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Hiring: Head of Project Control Location: Doha, Qatar Industry: Oil & Gas / LNG Contract Duration: 36 Months Work Schedule ✅ 100% Onshore ✅ Rotation: 12 Weeks ON / 2 Weeks OFF ✅ 6 Days per Week ✅ 8–10 Hours per Day Job Purpose We are seeking a highly experienced Head of Project Control to lead project administration, planning, scheduling, cost control, and performance management activities across major Oil & Gas/LNG projects. The successful candidate will be responsible for ensuring effective project controls, cost management, schedule stewardship, progress monitoring, reporting, workforce planning, and contractor performance management while supporting the successful delivery of projects within approved budgets and timelines. Key Responsibilities Project Controls Leadership<ul><li>Lead and manage all Project Management Team (PMT) project control activities.</li><li>Coordinate project controls deliverables across engineering, procurement, construction, and other project functions.</li><li>Ensure implementation and continuous improvement of the Project Control Plan.</li></ul>Cost & Schedule Management<ul><li>Drive project cost control, forecasting, budgeting, estimating, and reporting activities.</li><li>Manage planning, scheduling, and progress measurement processes.</li><li>Review and analyze project performance, trends, risks, and recovery plans.</li><li>Evaluate schedule and cost impacts resulting from project changes and variations.</li></ul>Contractor Performance Management<ul><li>Monitor EPC Contractor and subcontractor performance relating to:<ul><li>Project Controls</li><li>Scheduling</li><li>Cost Estimating</li><li>Progress Reporting</li><li>Performance Measurement</li></ul></li><li>Review project reports and ensure compliance with company standards and requirements.</li><li>Identify discrepancies and coordinate corrective actions.</li></ul>Stakeholder Coordination<ul><li>Act as the primary interface between:<ul><li>Project Manager</li><li>Business Manager</li><li>PMT Members</li><li>EPC Contractors</li></ul></li><li>Provide management with accurate project performance reports and recommendations.</li></ul>Financial & Commercial Support<ul><li>Review invoices for accuracy, completeness, and contractual compliance.</li><li>Support resolution of commercial and payment-related issues.</li><li>Coordinate with Accounts Payable, Finance, and Audit teams.</li><li>Ensure EPC Contractor accounting systems meet company audit requirements.</li></ul>Workforce Planning<ul><li>Manage workforce planning, resource forecasting, and manpower optimization.</li><li>Ensure fair and consistent workforce management practices across the project.</li></ul>Qualifications ✅ Bachelor's Degree in: <ul><li>Engineering</li><li>Accounting</li><li>Business Management</li><li>Business Administration</li><li>Commercial Discipline</li><li>Related Field</li></ul>Experience Required ✅ Minimum 10 years of experience in major Oil & Gas or LNG project environments. ✅ Proven experience in: <ul><li>Project Controls</li><li>Cost Engineering</li><li>Planning & Scheduling</li><li>Contract Management</li><li>Tender Preparation</li><li>Budgeting & Forecasting</li><li>Progress Monitoring</li><li>EPC Project Execution</li></ul>✅ Minimum 3 years of experience supervising multi-disciplinary and multicultural teams. ✅ Experience working on large-scale EPC projects within the Oil & Gas, LNG, Petrochemical, or Energy sectors. Key Skills ✔ Strong Project Controls expertise ✔ Advanced Cost Control & Forecasting skills ✔ Planning & Scheduling proficiency ✔ Contract and Commercial Management knowledge ✔ Leadership and Team Management capability ✔ Strong negotiation and influencing skills ✔ Excellent analytical and problem-solving abilities ✔ Effective stakeholder management ✔ Excellent written and verbal communication skills in English ✔ Strong organizational, planning, and prioritization skills With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

من ٠ إلى ٠ سنة بيت.كوم

Rotating Equipment Engineer

On-site - قطر ٢٢ يوليو ٢٠٢٦

الضيافة والسياحة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are seeking a Rotating Equipment Engineer who will be responsible for inspection, installation, preservation, testing, and quality monitoring of rotating equipment in oil & gas / petrochemical projects. Key Responsibilities: <ul><li>Review and approve ITPs, method statements, work instructions, and quality documents.</li><li>Monitor rotating equipment delivery, storage, preservation, installation, and inspection activities.</li><li>Conduct actual, witness, and surveillance inspections as per approved ITP.</li><li>Verify compliance with project drawings, specifications, codes, and contract requirements.</li><li>Coordinate with EPC contractors, subcontractors, and discipline engineers.</li><li>Prepare daily inspection reports and raise NCRs for quality deficiencies. </li></ul> Requirements<ul><li>Bachelor’s Degree in Mechanical Engineering or equivalent.</li><li>Minimum 8+ years experience in large international onshore oil & gas / petrochemical projects.</li><li>Knowledge of rotating equipment inspection, installation, storage, preservation, testing, and QA/QC procedures.</li><li>Good understanding of international codes, standards, drawings, specifications, and ISO quality requirements.</li><li>Fluent in English and proficient in MS Office. </li></ul> </div>

من ٠ إلى ٠ سنة بيت.كوم

Plant Inspector

On-site - قطر ٢٣ يونيو ٢٠٢٦

المحاسبة والمالية والبنوك

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Plant Inspector Job Purpose Execute inspection activities during EPC and start-up phases to ensure safe, reliable, and efficient operation of facilities through early defect detection and compliance with established standards. Key Responsibilities<ul><li>Conduct visual and NDT inspections on equipment such as vessels, piping, heat exchangers, and lifting equipment.</li><li>Perform integrity assessments and prepare inspection reports using inspection systems/software.</li><li>Monitor maintenance and project activities to ensure compliance with codes, standards, and procedures.</li><li>Identify defects, raise inspection recommendations, and track corrective actions to completion.</li><li>Support and supervise NDT testing activities (UT, MT, PT, RT, and advanced methods).</li><li>Maintain inspection tools, equipment, and accurate records in system databases.</li><li>Coordinate with contractors and cross-functional teams to ensure quality and compliance.</li></ul>Qualifications & Experience<ul><li>Diploma/HND in Engineering or related field.</li><li>Minimum 4 years of inspection experience in industrial/oil & gas environment.</li><li>Certification in API 510/570 (API 653 preferred).</li></ul>Skills<ul><li>Knowledge of inspection techniques and NDT methods.</li><li>Familiarity with RBI, corrosion, and damage mechanisms.</li><li>Good reporting, communication, and coordination skills.</li><li>Basic knowledge of plant processes and international codes.</li></ul>Core Competencies<ul><li>Safety and compliance</li><li>Problem-solving</li><li>Teamwork</li><li>Attention to detail</li><li>Planning and execution</li></ul> With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

دوام كامل 5 - 10 Years Naukri Gulf

Project Lead – Catalyst

On-site - قطر - الدوحة ٢٣ يوليو ٢٠٢٦

الهندسة

<ol><li>Lead and coordinate the execution of catalyst handling, shutdown, turnaround, and maintenance projects within the Oil & Gas, Petrochemical, Refinery, LNG, and Industrial Services sectors.</li><li>Support the Project Manager in planning, organizing, and delivering projects safely, efficiently, and within approved scope, schedule, budget, and quality requirements.</li><li>Provide leadership and direction to site teams, including supervisors, technicians, operators, and support personnel, to ensure successful project execution.</li><li>Develop project execution plans, work schedules, resource deployment plans, and site coordination strategies in collaboration with project and planning teams.</li><li>Coordinate mobilization of manpower, equipment, materials, and subcontractors to ensure project readiness and timely commencement of activities.</li><li>Monitor daily site activities, productivity, progress, and resource utilization to ensure alignment with project milestones and client expectations.</li><li>Identify project risks, operational challenges, and potential delays while implementing effective mitigation and recovery actions.</li><li>Prepare and review project progress reports, manpower reports, productivity updates, and operational performance reports for management and clients.</li><li>Act as the key site contact for client representatives, ensuring effective communication, issue resolution, and maintaining positive working relationships.</li><li>Conduct regular coordination meetings with clients, subcontractors, and internal teams to review progress, priorities, and project requirements.</li><li>Ensure all project activities are performed in accordance with approved procedures, technical specifications, quality standards, and client requirements.</li><li>Support quality control activities, including inspection processes, documentation review, and closure of non-conformances.</li><li>Monitor project costs, manpower utilization, equipment usage, and productivity to support budget control and operational efficiency.</li><li>Identify opportunities for cost optimization and improved project execution methods.</li><li>Ensure compliance with company HSE policies, client safety requirements, permit-to-work systems, and applicable industry standards.</li><li>Promote a strong safety culture by leading toolbox talks, safety initiatives, and proactive hazard identification across project activities.</li><li>Maintain accurate project documentation, including daily reports, work records, manpower tracking, and project close-out documentation.</li><li>Support lessons learned and continuous improvement initiatives to enhance future project delivery.</li></ol>Desired Candidate Profile<ol><li>Bachelor's Degree in Engineering, Project Management, or a related discipline.</li><li>PMP Certification or equivalent project management qualification is an advantage.</li><li>Minimum 5-10 years of experience in Oil & Gas, Petrochemical, Refinery, LNG, or Industrial Services projects.</li><li>Proven experience supporting or managing shutdown, turnaround, maintenance, and catalyst handling projects.</li><li>Experience coordinating large site teams and managing project activities in operational facilities.</li><li>Strong understanding of project execution processes, planning, scheduling, and resource management.</li><li>Experience using project planning tools such as Primavera P6, Microsoft Project, or similar software.</li><li>Good knowledge of catalyst handling, mechanical maintenance, industrial cleaning, and shutdown execution activities.</li><li>Strong leadership, communication, problem-solving, and stakeholder management skills.</li><li>Ability to manage multiple priorities and work effectively under shutdown and turnaround pressure.</li><li>Knowledge of HSE standards, permit-to-work systems, quality requirements, and industrial safety practices.</li><li>GCC project experience within Oil & Gas, Petrochemical, LNG, Refinery, or Industrial Maintenance environments is highly preferred.</li></ol>

من ٠ إلى ٠ سنة بيت.كوم

Lead GDS Masterplan Implementation

On-site - قطر ١٢ يونيو ٢٠٢٦

الهندسة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Primary Purpose of the Job This position is the Custodian of the GDS Masterplan implementation activities, with a broad remit covering the development and implementation of standards to reflect the philosophies developed as part of the GDS Masterplan study. This position will be responsible for ensuring the necessary collaboration across QatarEnergy Directorates and Conflict Resolution should the need arise. Required Experience and Skills Minimum of 15 years wide-ranging energy industry experience, with recent experience of leading & managing major change / Operational Excellence programs. Proven track record in delivering Operational standards, with experience in the deployment and use of continuous Improvement tools & methodologies. Significant subject matter expertise in gas transmission and distribution, and the development and delivery of design, safety, and operational standards. Knowledgeable in the areas of Asset Integrity – Design, Process Safety Management, Reliability & Maintenance Execution, Production Operations and Project Management. Credibility in frontline Operations in the Oil & Gas industry, demonstrated through experience in frontline leadership positions. English fluency and clarity in verbal and written language, possible Arabic, high integrity, mature temperament, communication, and interpersonal skills, sound analytical capability, innovative and original thinking with persuasive, consensus building and conflict resolution skills. Educational Qualifications Bachelor or Master of Science degree in an Engineering discipline. Preferably additional degree or diploma in post graduate studies in Engineering, Business Management or Finance. </div>

2 - 4 Years Naukri Gulf

Tendering/ Proposal Engineer

On-site - قطر - Qatar الأمس

اللوجستيات وسلاسل الإمداد والمشتريات

We are seeking a Tendering / Proposal Engineer to support the preparation and submission of tenders and proposals for engineering projects in Qatar within the oil & gas sector. The role will focus on developing technical and commercial proposals, coordinating tender requirements, and ensuring accurate and timely submissions.Review tender documents, requirements, and specifications. Prepare technical and commercial proposals for engineering projects. Coordinate with relevant teams to collect technical and commercial information required for tender submissions. Support estimation and proposal preparation activities. Ensure tender documentation is complete and submitted within required deadlines. Follow up on tender and proposal requirements throughout the submission process. Maintain accurate tender and proposal documentation.If you would like to know more about the Global Consulting Bootcamp Visit: https://caseinpointco.com/global-consultant-bootcamp/ If you would like to know more about the MC Club Visit: https://menaconsultant.com/mc-club/Desired Candidate ProfileKey RequirementsBachelor's degree in Mechanical Engineering or Electrical Engineering .2 4 years of experience in tendering, proposals, or estimation.Experience preparing technical and commercial proposals .Candidates must be currently based in Qatar .Preferred QualificationsExperience within the Oil & Gas sector .Experience working on EPC or engineering projects .Other QualificationsStrong communication and coordination skills.Good analytical skills.Ability to work under pressure and meet tender submission deadlines.

2 - 5 Years Naukri Gulf

Instrument Technician

On-site - قطر - Qatar ١٨ يونيو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">We are looking for experienced Instrument Technicians with hands-on expertise in troubleshooting, calibration, inspection, testing, installation, and preventive maintenance of instrumentation systems used in large-scale process industries. Candidates with experience in fertilizer, petrochemical, refinery, chemical, oil & gas, or power plants will be preferred. Key Responsibilities Troubleshoot, inspect, calibrate, test, and maintain field instrumentation. Perform preventive and corrective maintenance of transmitters, switches, analyzers, vibration monitoring systems, and control valves. Install, remove, configure, and adjust instrumentation equipment as required. Support leak detection systems, gas analyzers, and plant monitoring equipment. Diagnose instrumentation faults and implement corrective actions. Maintain records and update activities in CMMS. Follow permit-to-work systems, safety procedures, and HSEQ requirements. Ensure housekeeping standards are maintained after completion of work Salary: 90000 INR Per Month</div></section><section>Desired Candidate ProfileDiploma / ITI in Instrumentation, Electronics, Electrical, or related field. Minimum 2+ years of experience in fertilizer, petrochemical, refinery, chemical, oil & gas, power, or process plants. Hands-on experience with calibration tools, test equipment, and field instrumentation. Knowledge of CMMS, preventive maintenance, and troubleshooting techniques. Familiarity with DCS/SCADA systems and industrial safety standards. Good communication and report-writing skills in English. Strong understanding of PPE, work permit systems, and HSEQ practices.</section>

2 - 5 Years Naukri Gulf

Instrument Technician

On-site - قطر - الدوحة ١٨ يونيو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Job Summary We are looking for experienced Instrument Technicians with hands-on expertise in troubleshooting, calibration, inspection, testing, installation, and preventive maintenance of instrumentation systems used in large-scale process industries. Candidates with experience in fertilizer, petrochemical, refinery, chemical, oil & gas, or power plants will be preferred. Key Responsibilities Troubleshoot, inspect, calibrate, test, and maintain field instrumentation. Perform preventive and corrective maintenance of transmitters, switches, analyzers, vibration monitoring systems, and control valves. Install, remove, configure, and adjust instrumentation equipment as required. Support leak detection systems, gas analyzers, and plant monitoring equipment. Diagnose instrumentation faults and implement corrective actions. Maintain records and update activities in CMMS. Follow permit-to-work systems, safety procedures, and HSEQ requirements. Ensure housekeeping standards are maintained after completion of work</div></section><section>Desired Candidate ProfileDiploma / ITI in Instrumentation, Electronics, Electrical, or related field. Minimum 2+ years of experience in fertilizer, petrochemical, refinery, chemical, oil & gas, power, or process plants. Hands-on experience with calibration tools, test equipment, and field instrumentation. Knowledge of CMMS, preventive maintenance, and troubleshooting techniques. Familiarity with DCS/SCADA systems and industrial safety standards. Good communication and report-writing skills in English. Strong understanding of PPE, work permit systems, and HSEQ practices.</section>

من ٠ إلى ٠ سنة بيت.كوم

Analytics Applications Specialist

On-site - قطر ٢٢ يوليو ٢٠٢٦

تكنولوجيا المعلومات

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job P-1021-Q - Analytics Applications Specialist Qualifications <ul><li>Bachelor's degree in Computer Science, Information Technology, Information Systems, Data Science or other relevant disciplines including Business, Accounting, Commercial, Marketing, Sciences, Engineering, Project Management, Supply Chain Management, Law, Communication, Technologies, Mathematics, and Statistics </li></ul> Knowledge and/or Experience* Knowledge and/or Experience <ul><li>8 years experience in business related function or discipline, including 4 years in the Oil & Gas Industry. </li><li>Experience with Oil & Gas Companies, EPC contractors, subcontractors, vendors or service companies involved in the oil and gas industry. </li><li>Knowledge in project business related function/discipline such as planning, scheduling, cost control, estimating, claim management, risk management, change management, procurement, pre- and post award contract management, actionable and informative reporting, support services, lessons learned, etc. </li><li>Knowledge in international standards, best practices and methodologies as it relates to business disciplines. </li><li>SME level competence in candidate's specific business discipline. </li><li>Knowledge of relevant business processes/procedures. </li><li>Experience with risk assessment approach in decision making. </li><li>Strong knowledge of relevant software and computer skills, e.g., dashboards, data analytics, SAP, etc. </li><li>Experience supporting large scale integrated operating and executing organizations, such as Operations, Projects, Subsurface, etc. </li></ul> Technical and Business Skills <ul><li>8 years' experience as a Power BI Developer/Dashboard Designer or similar role —with a PL-300 certification considered a strong plus, preferably within the Oil & Gas Construction Industry. </li><li>Requires a minimum of 3 years of extensive experience developing custom Microsoft Power Platform solutions—featuring advanced proficiency in Power Apps (Canvas, Model-Driven, and Power Pages), Power Automate for process automation, and a strong technical understanding of solution management, environment governance, and Application Lifecycle Management (ALM)—with a PL-400 certification considered a strong plus. </li><li>A thorough knowledge of Data and Analytics with solid experience in interactive dashboard and reports development. </li><li>Strong IT and coordination skills. </li><li>Enforce data security best practices </li><li>Monitor and optimize database performance </li><li>Strong qualitative, quantitative analytical & problem-solving skills. </li><li>Strong skills in Power BI, MS SQL, SharePoint, Excel, Power Platform including power Apps </li><li>Experience in Oracle's Primavera P6 </li><li>Proficiency in: o Power BI development, including report & dashboard creation. o Power Apps development, including Canvas Apps, Model-Driven Apps, and Power Pages. o Power Automate for business process automation and cloud workflow creation. o Data modelling and data visualization concepts. o Data Analysis Expressions (DAX) & Power Query. o Low-code expressions, JSON handling, and custom API connector integration o MS Office (especially Excel). o ETL Tools like SSIS or Similar tools o ASP.NET, SharePoint, HTML, CSS, etc. </li><li>Some experience in the following areas: o Reports Automation using SSRS, Power Bi Report Builder or similar tools. o SAP Analytics Cloud (SAC), SAP BusinessObjects Lumira. o SAP Data Services & WEBI (BusinessObjects Web Intelligence) </li><li>5 years in SQL for data manipulation and extraction </li><li>Excellent written and spoken English. </li><li>Excellent communication and collaboration abilities. </li><li>Good supervisory skills. </li></ul> </div>

دوام كامل 5 - 10 Years Naukri Gulf

Senior Planning Engineer

On-site - قطر - الدوحة ٢١ يوليو ٢٠٢٦

الطب والرعاية الصحية

To lead project planning, scheduling, progress monitoring, and reporting activities for Oil & Gas flowline projects, ensuring timely completion within approved budgets while complying with client specifications, contract requirements, and company procedures.<ul><li>Key Responsibilities<ul><li>Develop, update, and maintain detailed project schedules using Primavera P6.</li><li>Prepare Level 3 & Level 4 project schedules, resource-loaded schedules, and manpower histograms.</li><li>Develop project baselines, work breakdown structures (WBS), and project execution schedules.</li><li>Monitor project progress and identify schedule deviations, delays, and critical activities.</li><li>Perform critical path analysis (CPA) and recommend recovery plans.</li><li>Coordinate with Engineering, Procurement, Construction, QA/QC, HSE, and subcontractors to ensure schedule compliance.</li><li>Prepare weekly and monthly progress reports, dashboards, S-curves, manpower histograms, and earned value reports.</li><li>Conduct schedule risk analysis and recommend mitigation measures.</li><li>Review contractor and subcontractor schedules and monitor their performance.</li><li>Participate in project review meetings with clients and consultants.</li><li>Evaluate Extension of Time (EOT) claims and prepare delay analysis when required.</li><li>Monitor productivity, resource utilization, and project KPIs.</li><li>Ensure project milestones and contractual deliverables are achieved.</li><li>Support tender planning by preparing preliminary schedules and resource requirements.</li><li>Coordinate shutdown and tie-in activities where applicable.</li><li>Ensure compliance with client planning procedures, contract requirements, and company standards.</li></ul></li></ul>Desired Candidate Profile<ul><li>Minimum 10–15 years of planning experience in Oil & Gas EPC projects.</li><li>At least 5 years of experience in Qatar or GCC.</li><li>Proven experience in flowline, pipeline, cross-country pipeline, wellhead, gathering station, and brownfield projects.</li><li>Experience with major clients such as QatarEnergy, QatarEnergy LNG, QatarGas, RasGas, or equivalent GCC operators is preferred.Education<ul><li>Bachelor's Degree in Mechanical Engineering (Mandatory)</li></ul>Experience<ul><li>10–15+ years in Oil & Gas EPC</li><li>Minimum 5 years in Qatar/GCC</li><li>Experience with Main EPC Contractor </li><li>Proven experience in Wells Hook-up EPIC Projects</li></ul>Mandatory Project ExperienceCandidates should have experience in:<ul><li>Well Hook-up</li><li>Brownfield Modifications</li><li>Greenfield Facilities</li><li>Flowline Installation</li><li>Pipelines</li><li>Wellhead Installation</li><li>Tie-ins</li><li>Hot Tapping (preferred)</li><li>Shutdown Activities</li><li>Process Piping</li><li>Mechanical Construction</li><li>Commissioning Support</li><li>Pre-commissioning</li></ul></li></ul>

من ٠ إلى ٠ سنة Naukri Gulf

Principal Piping Engineer

On-site - قطر - الدوحة ٢٥ مايو ٢٠٢٦

الهندسة

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Key Responsibilities<ul> <li>Supports the standardization of equipment specifications, drawings, and document templates.</li> <li>Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful.</li> <li>Uses local/global standards to support technical excellence.</li> <li>Identifies software necessary to enable piping group to function effectively.</li> <li>Provide specialist technical support, supervision and advice to the discipline and project teams; participate in peer reviews;</li> <li>Ensures recognised onshore & offshore engineering practices applicable to piping design and topside/plant layout are adopted within the discipline.</li> <li>Knows the project and discipline scope/cost/time requirements, ensures the team to meets the expectations, and liaises with other disciplines to ensure project success.</li> <li>Supports management of project change and progressing for the discipline and works with the Project Management Team to take corrective actions regarding any issues, staffing requirements, scope changes, progressing, or other events that could affect project completion and/or profitability.</li> <li>Plans discipline quality, monitors quality activities, drives squad checking, recommends improvements, and takes action where required.</li> <li>Collaborates with project team in review of project documentation such as proposals, estimates, budgets and schedules.</li> <li>Leads weekly piping meetings, reviews progress reports and required checking procedures.</li> <li>Determines technical issues, defines alternate solutions, establishes pros/cons for multiple solutions, and makes recommendations through official project documents such as technical queries, technical deviations, etc.</li> <li>Establish a list of discipline deliverables. Controls, monitors and progresses these deliverables to an agreed schedule.</li> <li>Lead the production of detailed designs and drawings, specifications, data, calculations and reports.</li> </ul>HSE Capability:<ul> <li>Maintain HSE focus with the team to ensure OHSE requirements.</li> <li>Demonstrate behaviour and business practices commensurate with a culture of world's best health, safety and environmental performance.</li> <li>Demonstrate a visible and active commitment to:<ul> <li>personal well-being.</li> <li>healthy and safe workplaces and activities.</li> </ul></li> </ul>Industry Specific Experience:<ul> <li>Extensive Piping Engineering experience at a senior level within the Oil & Gas industry in both Onshore and Offshore projects.</li> <li>Design & Engineering experience within the oil and gas industry, with recent experience leading a team of piping discipline engineers and designers.</li> <li>Extensive technical, practical and leadership experience in the piping discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams.</li> <li>Expertise on stress (unbalanced / transient conditions), complicated hot-tapping plugging of C3/C4 services, Inconel 625 materials specs and datasheets</li> </ul></div></section><section>Desired Candidate ProfileFull-Time bachelor's degree in mechanical engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.</section>

دوام كامل من ٠ إلى ٠ سنة

Onshore Emergency Coordinator

On-site - قطر - الدوحة ١١ أغسطس ٢٠٢٦

تكنولوجيا المعلومات

The Onshore Emergency Coordinator is responsible for developing, implementing, and continuously improving emergency preparedness and response systems for onshore operations. The position works closely with management, operations personnel, emergency response teams, government authorities, and external agencies to ensure the organization is prepared to effectively manage operational emergencies. The role focuses on reducing the likelihood and potential impact of incidents, protecting people and assets, maintaining effective emergency communications and coordination, and ensuring that emergency response capabilities remain aligned with applicable regulations, international standards, and industry best practices. Key Responsibilities Develop and maintain Emergency Response Plans, procedures, and ICS-based systems. Coordinate response to major and complex emergency incidents. Provide expert advice to management and Incident Commanders. Plan and conduct emergency drills, exercises, and training. Coordinate with government authorities, emergency services, and external agencies. Assess emergency scenarios, identify gaps, and drive continuous improvement. Ensure emergency response equipment, systems, and resources remain ready. Maintain compliance with applicable regulations and international standards. Qualifications & Experience Bachelor's degree in a relevant discipline. Minimum 8 years' relevant experience, preferably in oil & gas or other high-risk industries. Strong knowledge of Emergency Management and Incident Command System (ICS). Experience in emergency planning, incident management, drills, and stakeholder coordination. Strong leadership, communication, decision-making, and influencing skills.

دوام كامل من ٠ إلى ٠ سنة

Onshore Emergency Coordinator

On-site - قطر - الدوحة ١٠ أغسطس ٢٠٢٦

تكنولوجيا المعلومات

من ٠ إلى ٠ سنة بيت.كوم

CNC Machinist

On-site - قطر ٢٣ مايو ٢٠٢٦

الوظائف الفنية والعمالية

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are urgently looking for experienced Machinists (Lathe) for a reputed Oil & Gas / Petrochemical company in Qatar. The ideal candidate should have strong hands-on experience in conventional lathe machine operations, machining industrial components, and working in heavy industrial environments. Candidates must be capable of reading technical drawings, operating precision measuring instruments, and maintaining high-quality machining standards as per industry requirements. Key Responsibilities: • Operate conventional lathe machines for machining and repairing industrial components. • Perform turning, threading, boring, drilling, and facing operations as per technical drawings and specifications. • Use precision measuring instruments such as vernier calipers, micrometers, gauges, and measuring tools for accurate machining. • Inspect finished products to ensure compliance with quality and dimensional standards. • Carry out routine maintenance and cleaning of machines and work area. • Follow safety procedures and company regulations within workshop and plant environments. • Coordinate with supervisors and maintenance teams to complete assigned jobs within deadlines. Requirements <ul> <li>Minimum 5 years of experience as a Lathe Machine Operator / Machinist in Oil & Gas, Petrochemical, Refinery, Power Plant, or heavy industrial sectors. </li> <li>Strong knowledge of conventional lathe machine operations and machining techniques. </li> <li>Ability to read engineering drawings and technical specifications.</li> <li>Experience in machining industrial equipment components is preferred. </li> <li>Good communication and teamwork skills. </li> <li>Physically fit and capable of working in industrial environments. </li> </ul> </div>

من ٠ إلى ٠ سنة بيت.كوم

Head of Quality

On-site - قطر ٢٢ يوليو ٢٠٢٦

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>The Head of Quality is responsible for ensuring the effective implementation of the Project Quality Plan as applied within the home office of the Engineering, Procurement and Construction Contractor.</li> </ul> <ul> <li>The Head of Quality coordinates the implementation of quality systems and procedures and maintains a close working relationship with the Contractor Quality Team.</li> <li>The Head of Quality provides professional expertise for the execution of project work associated with the Trains Restoration Project activities.</li> <li>Establish and maintain the Quality Management System processes, procedures and plans, plan and initiatives to project costs:</li> <li>Ensure activities are undertaken in compliance with Company Quality policies, regulations and engineering standards and project specifications.</li> <li>Implement verification programs to monitor and ensure the quality, integrity and fitness of all goods and services to ensure effective, reliable and safe operations.</li> <li>Manage resolution of quality issues and monitor quality performance and lead the quality team, promoting effective consensus building where appropriate and providing coaching for the optimum performance of managed personnel.</li> <li>Mentor Contractor, Subcontractor's and Vendor's on LNG quality standards, expectations and performance ensuring they are competent and cost effective to provide work and services to project.</li> <li>Prepare and maintain the Project Quality Plan, Surveillance Programs and other quality procedures and tools and ensure their successful implementation across the project.</li> <li>Implements Early Warning Notice to provide notice to Project Management about quality issues and trends with potential to impact delivery of the project.</li> <li>Recruitment of the project QA personnel for site locations and personnel performance management. Provision of Site Inspection Services and Third-Party Inspection resources to project location needs.</li> <li>Implement project audit schedules and integrate participation in the project audit program, monitor audit findings to resolution and closure.</li> <li>Ensures procedures are functional and verify compliance for technical deviations to project specifications and procedures are subject to appropriate review and approval.</li> </ul> <ul> <li>Bachelor's Degree in Sciences or Engineering.</li> <li>Additional quality, welding or NDE inspection related qualifications</li> <li>10 years' experience in Quality in the Oil & Gas Industry, including 2 years of experience in a supervisory role, including acting roles, or oversight of service/vendor personnel.</li> <li>Experience with Oil & Gas companies, Contractors, or Service Companies.</li> <li>Excellent written and verbal English language communication skills</li> <li>Well-developed interpersonal skills and the ability to influence decisions using presentation, negotiation and facilitation skills.</li> <li>Experience with Oil & Gas companies, Contractors, or Service Companies.</li> <li>Knowledge of relevant Quality Systems, specifications, and tools and Industry standards.</li> </ul> <ul> <li>Salary:<ul> <li>Day Rate in USD Plus Allowance</li> </ul></li> <li>Work Schedule:<ul> <li>10 Hours / 6 Days</li> </ul></li> </ul> <ul> <li>Duration: <ul> <li>36 Months, with possible extension</li> </ul> </li> <li>Location: <ul> <li>Qatar</li> </ul> </li> </ul> </div>

من ٠ إلى ٠ سنة Naukri Gulf

Senior Contracts Engineer

On-site - قطر - الدوحة ١٢ يونيو ٢٠٢٦

تكنولوجيا المعلومات

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Prepare contractual and commercial aspects of any tender, in consultation with the user departments.Prepare and compile tender/contract documentation, with Legal and Finance groups to ensure viability, legality, interpretation and ease of administration.Develop the bidders list(s), including any pre-qualification exercises and evaluations required.Perform tender administration activities, including preparing tender clarifications, tender bulletins, and conducting pre-tender meetings.Coordinate the technical and unpriced commercial evaluation of tenders and conduct the subsequent priced commercial evaluation of technically acceptable tenders.Prepare the techno-commercial evaluation report and recommendations.Prepare contracts for all goods and services requirements as requested by the user departments, ensuring review and approval by the relevant parties.Provide post-award administration support to the user department, as necessary.Review, advise and negotiate revised terms, variation order requests, change orders, claims, etc.Perform other similar or related duties as required or assigned by the Manager Contracts Qatar.</div></section><section>Desired Candidate ProfileBachelor's Degree in relevant Engineering field.10 years' of relevant experience in contract administration in the oil and gas industry, preferably in the Middle East.Extensive knowledge of applicable commercial/legal practices.Experience in SAP.Effective interpersonal, verbal and written communication skills.Negotiation skills.Analytical skills.Teamwork skills.Planning and organizing skills.Good knowledge of written and spoken English. Knowledge of Arabic is an advantage.PC skills.</section>

Fire & Gas Supervisor RLP

High Voltage Technician

Treasury Analyst

Engineering Lead

Head of Project Control

Rotating Equipment Engineer

Plant Inspector

Project Lead – Catalyst

Lead GDS Masterplan Implementation

Tendering/ Proposal Engineer

Instrument Technician

Instrument Technician

Analytics Applications Specialist

Senior Planning Engineer

Principal Piping Engineer

Onshore Emergency Coordinator

Onshore Emergency Coordinator

CNC Machinist

Head of Quality

Senior Contracts Engineer

أصحاب المواقع

أصحاب العمل

الباحثين عن عمل

مطلوب مهندسين بترول

اشترك لتصلك وظائف مطلوب مهندسين بترول الجديدة دوريا علي بريدك